Key Technical Information

Review the main specifications, condition, location, availability and supporting details for this offer.

The 50 Hz version uses the R Schmitt Enertec M12-GTED41 12-cylinder gas engine and a Linz PRO35M E alternator at 400 V / 50 Hz and 1,500 rpm. Optional configurations include a weather enclosure, climate control for the control cabinet, exhaust silencer and catalyst. The supplied product material also describes a transportable 40-ft flat-rack configuration as a separate deployment option; inclusion in the offered commercial scope requires confirmation.

Application: Stand-alone natural-gas power generation; automatic emergency power operation available as an option.

Technical specifications

Fuel typeNatural Gas
Lower heating value (LHV)9.8 kWh/Nm³
Gas flow pressure2.2 - 5.0 kPa
ESP electrical power500 kW
PRP electrical power450 kW
COP electrical power400 kW
Fuel consumption at ESP (LHV)1,219 kW
Gas flow at ESP120 Nm³/h
Engine displacement22.6 litres
AlternatorLinz PRO35M E
Voltage / frequency400 / 50 V / Hz
Alternator speed / efficiency1,500 / 96.5 rpm / %
Exhaust temperature≈490 °C
NOx emissions500 mg/Nm³; 250 mg/Nm³ setup possible with changed performance data

Technical preview · copying/printing is discouraged. Screenshot prevention cannot be guaranteed on the open web.

Included equipment / scope

R Schmitt Enertec M12-GTED41 natural-gas engine; Linz PRO35M E alternator; electrical control and load cabinet; 10-inch touch-panel control interface; common base frame; standard generator-set cooling and operating components as described in the 50 Hz datasheet.

Documents available

ENERGY-LINE M12 G500 50 Hz datasheet Rev-4 (19.08.2026); 60 Hz datasheet; R Schmitt Enertec 2026 brochure; Energy Line presentation; Flat Rack Plug-&-Play product material.

Related live offers

Request Price →

No exact match?

Tell us what you need.

If the right equipment or technical offer is not currently listed, submit your requirement and let SourceLane review the next practical sourcing step.

Submit a Requirement →